![Strand Lighting Contact Power Pack Скачать руководство пользователя страница 29](http://html1.mh-extra.com/html/strand-lighting/contact-power-pack/contact-power-pack_installation-and-operation-manual_1383403029.webp)
Contact Power Pack Sensor System
Installation & Operation Guide
27
Step 5. Select Response Time:
Note:
For DH1 Mode, the Response Time is the time the sunlight is either below the Low
Sunlight setting or above the High Sunlight setting before Relay ON/OFF commands are
transmitted.
Note:
For DH2 and DH3 Modes, the Response Time selects how rapidly the dimmers are
adjusted with a change in light. Response times will vary based on how much and how rapid
the light changes. The dimmers can respond in as little as 5 seconds or as much as 30 minutes.
Step 6. Tap RLYS (C) to select the Relay(s) to control when in Relay Control Mode or the
which relays need to be On for Dimming to be enabled.
Step 7. Tap to select Relays:
Step 8. Tap DL (D) to Capture or Adjust the Low and High Sunlight Settings.
Step 9. When the Sunlight is at its Low Level (early morning or late evening), Press and
Hold the LSUN (1) button for 3 or more seconds. Release the button when the
Photocell Sensor LEDs turn off. After 4 seconds the Sensor will take a Snapshot of
the room and set the Low Sunlight Setting.
a. The Sunlight Setting can be modified by Tapping the –SUN (5) button decrease
the level in 5% increments (max is -80%).
b. The Sunlight Setting can be set back to its Snapshot Level by Tapping the =SUN
(6) button.
c. The Sunlight Setting can be modified by Tapping the +SUN (7) button to
increase the level in 5% increments (max is +200%).
Button 1
1 min for Relay Control - Most aggressive for Dimmer Raise/Lower
Control
Button 2
3 min for Relay Control
Button 3
5 min for Relay Control - Factory Default
Button 4
10 min for Relay Control
Button 5
15 min for Relay Control
Button 6
20 min for Relay Control
Button 7
25 min for Relay Control
Button 8
30 min for Relay Control - Slowest for Dimmer Raise/Lower Control
Button 0
Factory Default (5 min)
Button 1
Relay 1
Button 2
Relay 2
Button 3
Relay 3
Button 4
Relay 4
Button 0
Factory Default (No Relays Assigned)
Содержание Contact Power Pack
Страница 1: ......
Страница 39: ...Contact Power Pack Sensor System Installation Operation Guide 37 SYSTEM WIRING CAT5e Color Code Wiring...
Страница 47: ...Contact Power Pack Sensor System Installation Operation Guide 45 NOTES...
Страница 48: ...Part No 2 450213 010...