Strand Lighting Contact Power Pack, Руководство по установке и эксплуатации

Страница: 22 / 48

Installation & Operation Guide
Contact Power Pack Sensor System
20
Relay/Dimmer Selection (Blue)
The RELAY SELECTION field allows selection of which channels will react to the occu-
pancy sensor.
To change the relay/dimmer selection of the sensor:
Step 1. Enter Programming Mode (refer to page 16).
Step 2. Press RLYS button.
Step 3. Select the relay(s)/dimmer(s) to be controlled by the sensor. Any combination may
be assigned to the sensor (example: relays/dimmers 1, 2 3, and 4).
Exit programming by pressing the PGM/EXIT button or continue with programming by
selecting another field.
Sensitivity (Blue)
Part of the superior performance of the Occupancy Sensor involves the increased sensitivity of
the sensor system. The three settings are Low, Medium, and High. Each application may be
slightly different and the preferences of each user might be different. The default setting
(Medium) will be adequate for most situations.
The settings are described as follows:
Low : Lowest level of detection setting - when less detection is required - occupants are
close to the sensor or movements within the space are more pronounced.
This
level may result in the lights falsely turning off when there is low levels of activity.
Medium : Default setting - medium level of detection to fit most applications.
High : Highest level of detection - movements and activity within the space are less pro-
nounced. This level increases the possibIlity of false triggering (turning the lights
on) or keeping them on longer.
Button 1 Relay/Dimmer 1 * Factory Default
Button 2 Relay/Dimmer 2 * Factory Default
Button 3 Relay/Dimmer 3 * Factory Default
Button 4 Relay/Dimmer 4 * Factory Default
Button 0 Factory Default * Selects all relays/dimmers