Operating instruction Z7510 Multizone temperatur controller
I
Temperatur controller
28
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
08.2018
Operations manual NR4000-v.2
28
List of all parameters with associated options :
- Synchronisation
ON
OFF
With „Synchronized heating“ active, all zones are
heated up together, that means that all zones reach
their setpoint at approximately the same time. This
avoids that quick zones (e.g. the hot tips) reach
their set-point temperature much earlier than slower
ones (e.g. the manifolds).
- Adjustment lock
-
All parameters adjustable
- Only setpoint 1 adjustable
- Setpoints, alarm values and
ramps adjustable
- All parameters locked
The parameters that have been locked can be displayed
but not altered.
- Tracing function :
2,5 sec. ... 10 min.
Sample time
(factory default : 10 sec.)
Time between two subsequent temperature values to be
stored in the memory. The total time viewable at once
with this sample time is shown on the display .
Attention:
The sample time must be inferior to the fastest change in
actual temperature. Up to 90 temp. values can be stored.
Factory default
(list see Chapter 6.5)
