Operating instruction Z7510 Multizone temperatur controller
I
Temperatur controller
25
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
08.2018
Operations manual NR4000-v.2
NOLDEN Regelsysteme GmbH
25
Tracing function
Shows the actual temperature development over the
time for one choosen zone. Therefore, select first
the desired zone with the „
Zone
“ key.
The time axis is determined by the parameter
„Sample time“ (see chapter 6.1).
This tracing function enables the operator to obser-
ve the control behavior of any zone without the need
of additional measurement equipment and to adjust
the parameters accordingly, if needed.
In the event of an failure, the development of the
temperature prior to the failure can be studied after-
wards to analyse eventual causes.
