Operating instruction Z7510 Multizone temperatur controller
I
Temperatur controller
27
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
08.2018
Operations manual NR4000-v.2
NOLDEN Regelsysteme GmbH
27
6
Settings
6.1 Configuration level - device
Parameters determining the functioning of the entire
device, thus, valid for all zones. Those parameters
are already pre-set at delivery,
altering them can
cause malfunctions in some cases (e.g. the
sensor configuration).
- Press the „
HOME
“ key for the general overview of
all zones,
- then press „
Menu
“ key. The 1
st
parameter (zone
synchronisation) is shown.
- Alter the actual parameter with the „▲“ and „▼ “
keys.
- Save with „
Enter
“ key into power-loss save
memory
- Scroll through the list of parameters with the
„
Para
“ key
- If no entry is made for about 15 sec., the display
switches back to the general overview of all zones.
- Quit this menu : Press „Enter“ key 3 sec .
