STOVES 600CTI, Руководство пользователя

Страница: 20 / 32

18
General information
INSTALLATION SHOULD ONLY BE
CARRIED OUT BY A QUALIFIED
INSTALLER OR ENGINEER.
Please keep to the following points
most carefully;
•
The hob should not be fitted above
a washing machine, a fridge or a
freezer.
• Wall surfaces above the work
surface and in the immediate
vicinity of the cooking hob must be
heat resistant.
• Laminated surfaces and the adhesive
used for fixing them must be heat
resistant in order to avoid any
damage.
• The space for air circulation, located
underneath and at the back of the
hob improves its reliability by
ensuring that it will cool down,
however it has been fitted in.
We recommend that you install this appli-
ance in a work top which is a minimum
38mm deep.
The hob can be fitted into a a work top
less than 38mm deep, but the 9mm gap
between hob base and appliance must be
maintained
Choosing your installation
1. Over a unit with a door or drawer.
2. Above an oven.
In all cases your induction hob needs
to be well ventilated.
Make sure that the air inlet through the
ventilator grid underneath the hob are
never blocked.
1. Installing the hob over a unit
with a drawer or door
Air outlet is underneath work surface.
If necessary, remove the front cross-
piece of the unit.
Suitable protection to prevent obstruction
of the air inlet to the fans must be
provided.
INSTALLATION INSTRUCTIONS