STOVES 600CTI, Руководство пользователя

Страница: 19 / 32

17
The hob produces a smell the
first few times it is used
• Heat a pan full of water on each
zone for half an hour.
Pans make a noise during
cooking!!
• This is caused by vibration due to
the passage of energy from the
hob to the pan.
On a high setting this is quite normal
for certain types of saucepan. It
will not damage the hob.
The hob makes a slight clicking
sound
• This is caused by the distribution of
power between two heating zones
on the same side of the hob.
The top of the hob is always
warm (even when not in use)
• The electronic part of the hob, like
any other electronic equipment (TV,
transformer, etc), becomes warm.
The fan keeps working for a
few minutes after the hob has
been turned off
• To cool down the electronics.
Once a cooking zone has been
turned on, the indicators on the
panel keep flashing !!
• The pan you are using is not
suitable for induction cooking or is
less than 12cm (5”) in diameter.
The hob won’t work. The
indicators don't come on
• The electricity supply is not reaching
the appliance (faulty supply or
connection);
Check the fuses and the cut-out
switch.
• The electronic circuit is not working
properly;
Call Stoves Customer Support, or
your supplier.
When it is turned on, the
appliance cuts out
• The hob connection is faulty.
Check the connection and check
that the connection complies with
the appropriate standards.
When it is turned on, only one
side of the hob works
• The hob connection is faulty.
Check the connection and check
that the connection complies with
the appropriate standards.
TROUBLESHOOTING