Room Calibration
Dirac Live®
6
Introduction
Setup
Measure
Optimize
Export
34
6.8)
1.
With the first measurement completed, the position
is «checked».
2.
The measured response of all the channels is shown
for reference.
3.
You can re-measure a position as many times as you
wish.
4.
You can select a new position to measure.
There will be 8 to 15 additional positions of the
microphone required, depending on the arrangement,
to complete the capture process. Select Measure
selected position once selected.
5.
Then proceed to the next step. A pre-processing
of the measured curves will be done for few seconds.
4
1
2
3
5
