Web Installer Interface
Speakers setup
5
Principles
Creation
Theater
Layout
Bass
Speakers Adjustments
Distance
Manual
Management
Noise
Generator Levels Equalization
Sub
Theater
Audio
Zones
20
Expert Bass Management
1
2
1. In Expert Bass Management mode, you can define how you want the bass to be managed for each Speaker with
four options: Small, Large, «Large and Sub» and «Large with Sub». Small, Large and «Large and Sub» have same
properties as in Standard mode. «Large with Sub» offers the possibility to use a Large Speaker with low frequencies
capability to act as an independent Subwoofer channel plus a Small Speaker in the same physical speaker.
2.
Cut-off frequency of the Bass Management can be adjusted per Speaker, either by entering the required value or
using the - / + buttons. The crossover Slope can be either 12 dB or 24 dB per octave, with Linkwitz-Riley type.
Frequencies and Slopes can be different for the speaker High Pass Filter and redirected Bass Low Pass Filter.
3.
When Speakers are set to Large, «Large and Sub» or «Large with Sub», it is possible to redirect the Subwoofer
channel (redirected Bass from all Small or «Large and Sub» Speakers) to them.
Change this setting from None to a level between 0 to -20 dB, 0 dB being the highest.
4.
When Speakers are set to Large, «Large and Sub» or «Large with Sub», it is possible to redirect the LFE channel
(Low Frequency Enhancement) to them.
Change this setting from None to a level between 0 to -20 dB, 0 dB being the highest.
3
4
