Web Installer Interface
Settings
7
Triggers
Parameters
Front Panel
AV Delay
HDMI
16ch AES
IR Control
41
1
2
1.
Downmix output can be used with a screen. Selecting Audio/Video Zone
will add LipSync adjustment to the remote as well as general AV Delay in
Settings page.
2.
To avoid damage of speakers, the installer may decide to limit the range of
the audio adjustments available in the remotes (0 to 6dB).
3.
Master Volume can be decreased by a fix amount of dB via a DIM
button on Remotes. Define this level here. Default is -20dB.
4.
When an ISP-O-Dual Theater RCA option has been installed, you can activate
it either as a an Alternate or Replicate output bank. When Alternate,
independant Theaters can be created. When Replicate, it follows Theater and
output mapping of Main Speakers bank.
5.
There are two modes available in Sleep Mode: a low power consumption
one (slow start up, 40s) and a fast start up one (higher consumption, <5s).
Select whether to enable the Fast Boot mode here.
6.
Set Brightness level when adjusting through the Front Panel.
7.
Set Brightness level when in idle mode.
8.
Set time out between Active Mode and Idle Mode.
9.
You can select between different color themes.
10. When ON, settings updated in front panel such as Volume level,
or Input change will be shown in big size font.
5
6
7
8
9
3
4
10
11. For each zone, adjust the Delay required to compensate
Audio and Video desynchronization due to the display.
11
