AXS Strikemaster
Engineering Manual
AXS Strikemaster Programming and Operation Manual May 2013 Page 11 of 22
For more information visit
www.storm-interface.com
© Copyright Storm Interface. 2013. All rights reserved
Programming : Adding and Removing User Codes
To add or remove entry codes : log on to enter Programming Mode, then follow the appropriate command
sequence detailed on the following page.
a). Entry Codes should not start with numbers 9 or 1.
b). Each entry code recognised by the keypad is stored under a two digit reference known as the Code Index
Number. The code index number allows an authorised holder of the engineer’s code to remove entry codes
by keying in the code index number without having knowledge of the actual entry code. It also means that a
written record of valid code holders can be kept without recording the actual entry codes
c). Prior to operation of a second door, relay 2 must be set for door control see - Controlling a Second Door
Code
Index
Number
Users Name
Door
1 or 2
Latched
or
Timed
Code
Index
Number
Users Name
Door
1 or 2
Latched
or
Timed
00
25
01
26
02
27
02
28
04
29
05
30
06
31
07
32
08
33
09
34
10
35
11
36
12
37
13
38
14
39
15
40
16
41
17
42
18
43
19
44
20
45
21
46
22
47
23
48
24
49
