StorageWorks Wide Expansion Storage Pedestal
3–6
Order Number: EK–SMCPC–UG. A01
9. Refer to Section 2.4.1 for cable routing information and connect SCSI "P" cable, for
device addresses 0, 2, and 4, between host and JA1 on the personality module.
10. Connect right-angle connector on SCSI "P" cable for devices in slots 1, 3, 5, and 6 to
JB1 on the personality module.
11. Connect other end of SCSI “P” cable to host. (Refer to Section 2.4.1 for cable
routing information.)
12. Replace blowers as described in Section 4.4.
13. Install both bezels as described in Section 4.5.2.
14. Reconnect power cord and power on pedestal.
15. Verify that all devices are active as described in Section 2.5.
Figure 3–4 Backplane Configuration for Two SCSI Buses (Front View)
