Administrator Guide
39
Monitoring for the appropriate sensor is turned on.
To disable monitoring
1.
Click
Maintenance
.
2.
Click
Monitoring
tab.
3.
Pick the desired sensor from the tree on the left.
4.
Uncheck the
Enable monitoring
checkbox.
5.
Click
Set
.
Monitoring for the appropriate sensor is turned off.
To set specific description label for any sensor
1. Click
Maintenance
.
2. Click
Monitoring
tab.
3. Pick the desired sensor from the tree.
4. Type description into the appropriate field on the right.
5. Click
Set
.
To fix the status of newly-inserted disk
1. Click
Maintenance
.
2. Click
Monitoring
tab.
3. Pick the desired disk sensor from the tree.
4. Click
Fix
on the right.
The status of a disk should change to Ok.