EYE
Cam
11
5.
Advanced users can set the IP Address, Subnet Mask, Gateway, DNS Server and Port settings manually, but
for most users it is recommended to click the “Obtain IP from DHCP server” option and click “OK”.
NOTE
The default user name for the IP Camera is “admin” and password is blank, as in the example above.
TIP
It is recommended to change the default port from 80 to something different, e.g. 81, 82.
The camera will restart. Please allow up to 2 minutes for the camera to become ready before continuing the
setup procedure.
6.
Once the IP Camera is ready, it will reappear in the IP Camera Tool list with correct IP address information.
From here you can double-click the IP Camera on the list to launch Microsoft Internet Explorer Web browser.
TIP
Microsoft Internet Explorer 8 is recommended for use with this IP Camera. Users of Internet Explorer 9
may need to switch to compatibility mode.
7.
Continue to section “
Web-Based Management
” (page 23) for instructions on how to use the Web-based
interface.
NOTE
To set up remote (Internet) viewing of the IP Camera, it is recommended to set the camera’s IP address
statically, rather than automatically via DHCP. To do this, untick the “Obtain IP from DHCP server” option
and insert the required information manually.
