Stonex S9III Plus GNSS Receiver – User Manual
46
marked files on your PC, in the folder you prefer. As regards the antenna
height editing, you can see the submenu in Figure 5.23:
Fig. 5.23
–
Edit Antenna Height window
In the “Edit Antenna Height” menu you can modify the point name (only 4
character will be taken into account), insert the correct antenna height in
meters and specify how the height was measured (“Measure Mode” box), there
are three different option:
a) Antenna phase center: from ground to the phase center (not possible from
the practical point of view)
b) Antenna slant height mode: from ground to the white line in the middle of
blue rubber.
c) Antenna vertical height: from the ground to the bottom of receiver.
In “Output Antenna Height” box you will see the resulting antenna height from
ground to the phase center.
5.4. Serial Port Forwarding
This function is for advanced users and technical support only.
