Stonex S9III Plus GNSS Receiver – User Manual
32
maximum frequency depends on the GNSS internal board settings, S9 III
usually could be set up to 20 Hz.
Automatic Record: Start automatic GPS static survey after power on. For static
survey this option strictly NEED to be enabled in Stonex Assistant.
When the configuration is completed, click on button “Save” to update the
Receiver configuration.
5.2.2. Dynamic
In the Dynamic working mode (Rover or Base) the following parameters should
be specified, as you can see in Fig. 5.6.
Fig. 5.6 – Dynamic Working mode parameters
Some definitions:
Differential type: To select the format of the differential corrections
transmitted or received.
Elevation mask: Define the minimum elevation of used satellite to be collected
in order to avoid noisy satellites (suggested value between 20° and 10°).
