Stonex S9III Plus GNSS Receiver – User Manual
37
a)
the Base SIM telephone number
b)
set an interval for GGA upload (the suited interval depends of the
correction source)
c)
enable the automatic connection.
In the base configuration he should only enable the automatic connect, not
other set is required, it is also necessary to switch on first the base and then
the rover. Anyway you can also refer to a specific tutorial regarding how to
set a direct call between two S9 III PLUS.
Fig. 5.13
–
CSD Settings
PPP: For VPN (Virtual Private Network) users, where each SIM card has a static
IP address. Therefore, the rover can be connected directly to the base via
entering the base IP. The user have to set into the right part (see Figure 5.14):
d)
APN parameters for internet connection, that depends on the
provider of the network connection, usually only “Name” is required.
e)
IP address and port.
