Stonex S9III Plus GNSS Receiver – User Manual
39
Custom: It is used for other internet GPRS connection to a network
software/server that doesn’t require a user name and a password or only a
password. If you select this option, you have to insert the following data in the
right side (see Figure 5.16):
a)
APN parameters for internet connection.
b)
NTRIP setting parameters: IP address and Port number of
computer where the software runs, Type of Mount Point and
Password if required (usually for base it is not required so you
can it empty).
c)
Enable the automatic connection.
Fig. 5.16
–
Custom Settings
GGA Upload: input window provide the interval of NMEA GGA string upload,
this string contains the rover coordinates that must be sent to the CORS or
base, the proper interval depends on the base, usually it is not important to
set it.
Automatically connect: when this box is enabled, the receiver, as soon as it is
switched on, will try automatically the connection to the previously stored
server without need that user sends any command through a software.
Click on “OK” button to confirm your entry.
