Stonex S9III Plus GNSS Receiver – User Manual
23
4. S9III PLUS Configuration
4.1. The installation of base and rover
Fig. 4.1 - Base and rover configuration
Installation of Base
1)
Install the tripod on the chosen location, level it and attach the receiver
into tribrach.
2)
Attach the transmitting radio antenna into the port “UHF”. If you are
using a direct GSM connection you should attach the gsm antenna into
“GPRS” port.
3)
Switch on the receiver and check the working mode. If it is not correct,
please see next paragraph 4.2 for understanding how to select the
correct working mode or you can change it later using the handheld
software.
4)
Switch on the handheld and start the software for the radio channel
configuration and inserting the base coordinates, otherwise it is possible
to make the settings by Stonex Assistant pc software.
BASE
ROVER
