STOK SGP2220, Руководство оператора

Страница: 9 / 80

9
ASSEMBLY
UNPAcKING
This product requires assembly.

Carefully lift grill from the carton and place it on a level
work surface.
NOTE:
This grill is heavy. To avoid back injury, keep your
knees bent and lift with your legs, not your back, and get
help when needed.

Inspect the grill carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected the grill, identified all loose parts, and
satisfactorily operated the grill.

If any parts are damaged or missing, please call
1-800-847-5993 for assistance.
Fig. 4
ScREw
(hh)
lock
wAShER
(ll)
flAT
wAShER
(kk)
RighT
lEgS
RighT SidE
bRAcE
wARNING:
Do not use this product if any parts on the Loose Parts List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
wARNING:
If any parts are damaged or missing, do not operate
this grill until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
cAUTION:
Some parts may contain sharp edges that may cause
personal injury. Wear protective gloves if necessary.
TOOLS NEEdEd
See Figure 4.
The following tools (not included or drawn to scale) are
needed for assembly and making adjustments:
phillipS
ScREwdRivER
AdjuSTAblE wREnch
Fig. 5
STEP 1: ASSEMBLING ThE RIGhT SIdE LEGS
See Figure 5.
Remove the following hardware from the blister pack:
hh
- 4 Screws (M6 x 12 mm)
KK
- 4 Flat washers (M6)
LL
- 4 Lock washers (M6)

Slide the right side brace over the right side legs.
NOTE:
Make sure the holes on the legs face to the inside.

Slide a lock washer (LL) and flat washer (KK) onto each
screw (hh) and through the holes in the brace.
 Tighten securely.
holES fAcing
inwARd