15
fibER
wAShER
ASSEMBLY
STEP 15: INSTALL MAIN GRATE ANd GRATE
INSERT
See Figure 19.
Carefully place the main grate inside the firebox.
Set grate insert in hole of main grate.
STEP 16: INSTALLING ThE GREASE cUP
See Figure 20.
Slide the grease cup into the tray holder located under
firebox.
NOTE:
Clean the grease cup after each use. Do not remove
the grease cup until the grill has completely cooled.
STEP 14: ASSEMBLING hOOd
See Figure 18.
Remove the following hardware from the blister pack:
GG
- 2 Screws (M6 x 25 mm)
KK
- Flat washer (M6)
LL
- Lock washer (M6)
Slide a lock washer
(LL)
then a flat washer
(KK)
over each
screw
(GG).
Insert screws and washer through holes from underneath
hood.
Place fiber washers onto screws
(GG).
Place heat shield, then handle, onto screws and fiber
washers.
Tighten screws and hardware securely into handle.
hAndlE
hEAT ShiEld
hood
ScREw
(gg)
Fig. 18
Fig. 20
gREASE
cup
cup
holdER
mAin
gRATE
gRATE
inSERT
hood
Fig. 19
flAT wAShER
(kk)
lock
wAShER
(ll)
Содержание SGP2220
Страница 26: ...26 notes...
Страница 79: ...26 notas...