18
ASSEMBLY
STEP 19: TESTING VALVES, hOSE, ANd REGU-
LATOR fOR LEAKS
See Figure 26.
Connections on the hose and regulator were tested at the
factory to ensure no gas leaks were present. However, ship-
ping and handling could loosen connections. As a safety
precaution:
Turn all control knobs on the control panel off.
Make sure the regulator is properly connected to the LP
gas cylinder.
To open the cylinder valve: turn handwheel counterclock-
wise.
If you hear a
rushing
sound, immediately turn off the
cylinder valve. This sound means there is a major leak at
the connection. Correct the problem before proceeding.
Using a clean paint brush and a 50/50 mixture of mild
soap and water, brush soapy solution over all the con-
nections and fittings on the grill.
“Growing” bubbles indicate a leak. Close the cylinder
valve then retighten all connections.
NOTE:
If leaks cannot be stopped, do not try to repair.
Call for replacement parts.
If you are not using the grill immediately after the leak test,
close the cylinder valve by turning the valve clockwise).
STEP 20: TESTING ThE LP GAS cyLINdER
See Figure 27.
Turn the control knobs on the control panel off, turn off
the LP gas cylinder valve, and disconnect the regulator
from the cylinder.
Remove the LP gas cylinder from inside the cabinet.
Using a clean paint brush and a 50/50 mixture of mild
soap and water, brush soapy solution over areas indicated
by arrows in figure 24.
“Growing” bubbles indicate a leak. Do not use or
move the gas cylinder. Contact a gas supplier or the fire
department!
If you see, smell, or hear the hiss of escaping gas from
the liquid propane cylinder:
• Move away from liquid propane cylinder
• Do not attempt to correct the problem yourself
• Call your local fire department
Fig. 26
REgulAToR
Fig. 27
lp gAS cylindER
wiTh “gRowing”
bubblES
hoSE
Содержание SGP2220
Страница 26: ...26 notes...
Страница 79: ...26 notas...