manualshive.com logo in svg

Stober 56690, Руководство пользователя

Поделиться
Скачать
Stober 56690 Скачать руководство пользователя страница 196

15 | Appendix

STOBER

196

05/2019 | ID 442790.01

15.4

DriveControlSuite

The DriveControlSuite commissioning software uses wizards to guide you step by step through the installation process. You
can find more detailed information on the system requirements and installation in the following chapters.

15.4.1

System requirements

The following minimum requirements for the PC system apply to the installation and operation of the DriveControlSuite
commissioning software and the integrated PASmotion component for configuring the SE6 safety module:

§

Operating system: Windows 7 SP1 (32-bit, 64-bit *), Windows 10 (32-bit, 64-bit *)

§

Processor: Intel Pentium 4 (2 GHz, Dual Core) or equivalent

§

Memory: 2 GB

§

Free disk space on the hard disk: 1 GB

§

Graphics: 1024 × 768 pixel resolution, 65536 colors

§

Font size: 100% (default)

§

Interfaces: 100 Mbps Ethernet (Fast Ethernet, copper)

§

Display of documentation: Adobe Acrobat Reader version 7.1.0 or later**

*) 64-bit support: only DriveControlSuite

**) Display: only PASmotion

15.4.2

Installation types

Choose between one of two installation types for the installation.

Standard installation

Select this installation type if you want to install the latest version of DriveControlSuite.

DriveControlSuite is installed in the version-independent .../Programme/STOBER/DriveControlSuite/ directory. During the
installation process, you do not need to specify any additional installation instructions.

Provided that you are connected to the Internet, a check is performed prior to installation to determine if a newer software
version is available. If a newer version is already available, it is downloaded and installed in place of the started version.

If an older software version is already installed on your PC, it is deleted prior to installation. However, if the latest version is
already installed on your PC, a new installation is not performed.

User-defined installation

Select this installation type if you want to install a specific version of DriveControlSuite or if you still need an older version
that is already installed on your PC.

You can use this setting to change the default installation directory and manage the version-dependent destination folders.

Checking whether the software version is up-to-date before installation is optional.

Содержание 56690




























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды