Revision history
Table 14.
Document revision history
Date
Revision
Changes
02-Mar-2011
1
Initial release
18-Apr-2012
2
•
Added: STEVAL-MKI109V2
•
Modified: Bill of materials for STEVAL-MKI109V2
•
Added new supported demo kits.
•
Updated Table 2: List of supported MEMS adapter boards, Table 4: Returned
values for *start command and Table 5: Returned values for *debug command.
09-Sep-2013
3
Updated: Section 2.2: DFU, Table 2: List of supported MEMS adapter boards, Table 4:
Returned values for *start command and Table 5: Returned values for *debug
command.
03-Nov-2014
4
Updated: Section 2.1: Hardware installation (Windows platforms), Table 2: List of
supported MEMS adapter boards, Table 4: Returned values for *start command, and
Table 5: Returned values for *debug command
Added: Section 2.2.2: DFU on Linux, Section 2.2.3: DFU on Mac OS, and Section 4.2.8:
Digital output humidity sensor: supported commands
Removed: STEVAL-MKI109V1
20-Oct-2016
5
Added Figure 4: How to connect the DIL24 adapter board to the STEVAL-MKI109V2
Updated version of VCP Driver to V.1.4.0 in Section 2.1: Hardware installation
(Windows platforms)
Updated reference to version of firmware in use to lower than V3.0.0 in Section 2.2:
DFU
Updated version of DFU software to V3.0.5 in Section 2.2.1: DFU on Windows
Updated Table 2: List of supported MEMS adapter boards
Updated Table 4: Returned values for *start command
Updated Table 5: Returned values for *debug command
05-Feb-2018
6
Table 2. List of supported MEMS adapter boards
Table 4. Returned values for *start command
UM0979
UM0979
-
Rev 6
page 35/39
