Still FS-X33, Оригинальное руководство пользователя

Страница: 17 / 94

Safety
2
Residual risk
capacity diagram) and the maximum
permissible dimensions according to the
datasheet. This also includes, of course,
the accumulated weight of the picked goods
• The loads to be transported and stored
must be packed securely so that the centre
of gravity of the load cannot change during
transport, and parts cannot fall. Also
consider the safety of your colleagues.
• If very high loads that block the view of
the driving lane have to be transported,
corresponding safety measures must be in
place.
• Hanging or swinging loads must not be
attached to and transported on the lifting
accessories.
Residual risk
Residual dangers
Despite observation of all pertinent safety
regulations for the design and construction
of our trucks and despite proper use by the
operating company, residual dangers can
occur during operation. We refer to this
specifically in the individual chapters.
Please observe all safety information without
fail.
Stability
The stability of the truck has been tested to
the latest technological standards and is
guaranteed if the truck is used properly and
according to its intended purpose. These
standards only take into account the dynamic
and static tipping forces that can arise during
use specified in accordance with the operating
rules and intended purpose. A danger of
exceeding the moment of tilt caused by
improper use or incorrect operation cannot be
excluded in extreme cases, and may impact
stability.
The following improper behaviour can lead to
a loss of stability:
51328042507 [EN] 11