Still FM-X Скачать руководство пользователя страница 66

Страница: 66 / 292

Operation

Checks and tasks to be carried out prior to commissioning

Visual inspections

WARNING

Risk of accident due to damage or other defects on

the truck or on the attachment (variant)!
Damage to the truck or the attachment (variant) can

lead to unpredictable and dangerous situations.

If damage or other defects are identiﬁed on the

truck or attachment (variant) during the following

inspections, the truck must not be used until it has

been properly repaired.
– Do not remove or deactivate safety systems or

switches.

– Do not change any predeﬁned set values.
– Do not use the truck until it has been properly

repaired.

WARNING

There is a risk of falling when working on high parts

of the truck.
– Use only the steps provided on the truck.
– Do not stand on truck components or use them

to help you climb onto the truck.

– Use suitable equipment.

Prior to commissioning, ensure that the truck

is safe for operation:
• All covers must be ﬁtted and closed
• The fork arms must be secured against

lifting and shifting

• The locking devices (1) of the fork arms

must not be damaged or deformed

• Fork arms and other lifting accessories

must not show any noticeable damage (e.g.

bends, cracks, signiﬁcant wear)

• The roller tracks (2) must be lubricated with

a visible grease ﬁlm

• The slide tracks of the reach carriage must

be lubricated with a visible ﬁlm of grease

• The chains must not be damaged and must

be evenly and adequately tensioned

• Check the area under the truck for leaking

consumables

• The guard grille (variant) and overhead

guard or weather protection cab/cold store

50988078001 [EN]

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды