Still FM-X Скачать руководство пользователя страница 203

Страница: 203 / 292

Operation

Handling the battery

DANGER

Risk of accident!
The battery could fall from the lifting accessory,

or the lifting accessory could tip over or become

damaged. If this happens, there is a risk to life.
The battery must be removed only when the truck

is on level, smooth ground with sufﬁcient load

capacity. The load capacity of the lifting accessory

used (see operating instructions or nameplate)

must at least match the battery weight (see battery

identiﬁcation plate).
– Check the load capacity of the lifting accessory.
– Remove the battery on suitable ground.

DANGER

The battery weight and the dimensions affect the

stability of the truck. There is a risk of tipping!
When changing the battery, the weight ratios

must not be changed. The battery weight must

remain within the weight range prescribed on the

nameplate.
– Do not remove or change the position of ballast

weights.

– Note the battery weight on the nameplate.

CAUTION

Incorrect connection or operation

of the charging station or battery

charger may result in damage to

components!
– Follow the operating instructions

for the charging station or battery

charger and for the battery.

The following safety regulations must be

observed when maintaining, charging and

changing the battery.

Maintenance personnel

Batteries may only be replaced by properly

trained personnel in accordance with the

instructions of the manufacturers of the

battery, battery charger and truck.
The maintenance guidelines for the battery

must be followed.

50988078001 [EN]

193

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды