Still FM-X Скачать руководство пользователя страница 135

Страница: 135 / 292

Operation

Handling loads

DANGER

Risk of accident!
When transporting hanging loads, never abruptly

perform or end driving and load movements.
Never drive on upward or downward gradients with

a hanging load!
It is not permissible to transport containers holding

ﬂuids as hanging loads.

Picking up a load

NOTE

Loads may only be picked up and set down on

ﬂat surfaces.

DANGER

There is a risk to life caused by a falling load or if

parts of the truck are being lowered.
– Never walk or stand underneath suspended

loads or raised fork arms.

– Never exceed the maximum load indicated on

the capacity rating plate. Otherwise stability

cannot be guaranteed.

Only store pallets that do not exceed the per-

missible measurements. Damaged loading

equipment and incorrectly formed loads must

not be stored. Store the load so that the spec-

iﬁed aisle width is not reduced by protruding

parts.
– Approach the racking carefully, brake gently

and stop just in front of the racking.

50988078001 [EN]

125

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды