Still FM-X Скачать руководство пользователя страница 161

Страница: 161 / 292

Operation

Operating auxiliary equipment

For this reason, load measurement is disabled

during the following truck activities:
• Driving
• Lifting
• Lowering
Once the fork has been in the inactive posi-

tion for two seconds, load measurement is

enabled. Load measurement is now possible.
The measured weight of the load is shown on

the display and operating unit.
If the button for load measurement is pressed

while load measurement is disabled, " - -

- - " is displayed instead of the measured

weight. After a maximum of ten seconds,

the display returns to the speed indicator.

If load measurement is possible within ten

seconds because the fork has moved into the

inactive position, the measured load weight is

displayed.

NOTE

The displayed value of the load measurement

is invalid if the fork carriage is positioned

exactly between the free lift height and main

lift height during the measurement. In this

case, the measurement must be repeated at

a different position. In addition, the load must

be lifted completely off the ground during the

measurement.

Performing the load measurement

– Slightly lower the fork with the load. This will

increase the accuracy of the measurement.

– Press the (1) button to start the load mea-

surement.

The measurement is performed once the load

is in the inactive position.
On the display and operating unit (2), the

measurement result is now displayed instead

of the speed indicator. The displayed value

relates only to the completed measurement

and is not updated.

50988078001 [EN]

151

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды