Still FM-X Скачать руководство пользователя страница 181

Страница: 181 / 292

Operation

Cab operation (variant)

Closing the cab door

DANGER

Risk of fatal injury as a result of driving with the cab

door open!
The driver can be injured if he does not keep his

entire body within the protective cab, or if he falls off

the truck.
– Always close the cab door before driving off, and

keep it closed when driving.

DANGER

There is a risk of damage caused by collision if the

cab door opens while driving.
– The cab door must be latched securely in the

engaged position.

– Close the door ﬁrmly.
The door must engage in the lock and the

rubber seals must line up correctly.

Emergency exit window in the cab

CAUTION

The emergency exit window is only intended for

leaving the truck in the event of an emergency.

There is a risk of damage caused by collision if the

truck is driven with the window open or if the window

opens while driving.
Do not drive with the emergency exit window open.
If the window has been opened, make sure that the

window is latched securely in the engaged position

before driving off again.

The window behind the driver’s seat is used to

rescue the driver if he or she is shut inside the

cab in a hazardous situation, for example

if the truck has toppled over and the cab

door can no longer be opened. It is labelled

EMERGENCY EXIT ONLY.
– Switch off the truck.
– To make it easier to climb out, fold down the

driver’s seat backrest.

50988078001 [EN]

171

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды