Still FM-X Скачать руководство пользователя страница 40

Страница: 40 / 292

Safety

Basic principles for safe operation

Only restraint systems (variants) that have

been speciﬁcally approved by STILL may be

installed and used.

DANGER

Risk of injury if truck tips over!
Even if the driver has fastened the

seat belt (variant), there is still a

residual risk of injury if the truck

tips over. In addition, the seat belt

protects against the consequences

of rear-end collisions and falling off a

ramp.
– The seat belt (variant) must always

be used.

When carrying out welding work on the

truck, it is essential that the battery and all

connections to the electronic control cards are

disconnected. Contact the authorised service

centre on this matter.
In the event of the manufacturer going into

liquidation and the company not being taken

over by another legal person, the operating

company can make changes to the truck.
To do so, the operating company must fulﬁl

the following prerequisites:
Design documents, test documents and

assembly instructions associated with the

change must be archived and remain accessi-

ble at all times.
The capacity rating plate, decal information,

hazard warnings and the operating instruc-

tions must be checked to ensure they are

consistent with the changes and modiﬁed if

required.
The modiﬁcation must be designed, checked

and implemented by a design ofﬁce that

specialises in industrial trucks in accordance

with the standards and directives valid at the

time the modiﬁcation is made.
Decal information with the following data must

be permanently afﬁxed to the truck so that it is

clearly visible:
– Type of modiﬁcation
– Date of modiﬁcation

50988078001 [EN]

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды