Still EXP 14, Оригинальное руководство пользователя

Страница: 72 / 144

4
Use
Breaking-In
Loading and unloading the truck
To load and unload the truck, use a loading
bridge or a lift (with a slope and structural
strength compatible with the performance
and weight of the truck as stated by the
manufacturer, and that is suitably positioned
and anchored). See the relevant section.
Alternatively, a crane or a bridge crane may
be used.
The truck must be suitably protected from the
effects of the weather during transport and
storage.
Lifting with a crane or a bridge crane
CAUTION
Always switch off the ignition and disconnect the
battery.
Never tie down or sling the truck by the tiller or other
points not designed for this.
– Insert the rope sling in the appropriate
eyelet on the column. The hook and the
rope sling must have a capacity suitable
for the weight of the truck. The position is
indicated by a hook symbol
DANGER
Use a crane with a suitable lifting capacity for the
weight of the truck, indicated on its data plate. Also
take into account the weight of the battery fitted (if
applicable), referring to the relevant identification
plate. Lifting operations must be performed by
qualified personnel. DO NOT stand within the
crane’s radius of action or near the truck. Do not
stand in the danger area beneath suspended loads.
Use NON METALLIC slings. Make sure that the
lifting capacity of the slings is suitable for the weight
of the truck.
DANGER
The rope slings should have a suitable length so
as to not graze the casings or any additional equip-
ment during lifting. Use a lifting beam if necessary.
The rope slings must be pulled vertically.
Breaking-In
This type of forklift does not require special
breaking-in operations.
66 45758043402 [EN]