Still EXP 14 Скачать руководство пользователя

Страница: 21 / 144

Safety

Residual risks

NOTE

For greater information, consult the speciﬁc

battery manual that comes with the battery.

ENVIRONMENT NOTE

The batteries contain substances that are ha-

zardous to the environment. The replacement

and disposal of the life-expired battery must

be carried out as required by law. We advise

you to contact the authorised service network

that is equipped for eco-friendly disposal in

accordance with current regulations.

Residual risks

Residual dangers, residual risks

Despite careful use and compliance with

standards and regulations, the possibility

of other risks occurring when using the truck

cannot be entirely excluded.
The truck and all other system components

comply with current safety requirements.

Nevertheless, even when the truck is used

for its proper purpose and all instructions

are followed, some residual risks cannot be

excluded.
Even outside the deﬁned danger areas of

the truck, residual risk cannot be excluded.

Persons in this area around the truck must

exercise a heightened degree of awareness,

so that they can react immediately in the event

of any malfunction, incident or breakdown etc.

WARNING

All persons that are in the vicinity of the truck must

be instructed regarding the risks that arise through

use of the truck.
In addition, we draw your attention to the Safety

Guidelines in these operating instructions.

Risks can include:
• Escape of consumables due to leakages,

rupture of lines and containers etc.

• Risk of accidents when driving on ramps or

in conditions of poor visibility, etc.

• Falling, tripping etc. when moving the truck,

especially in wet or icy conditions or when

consumables are leaking.

45758043402 [EN]

Содержание EXP 14

















































































































































Результаты поиска

Содержание EXP 14

Отзывы:

Похожие инструкции для EXP 14

Бренды по названию

Популярные бренды

Still EXP 14, Оригинальное руководство пользователя

Результаты поиска

Содержание EXP 14

Отзывы:

Похожие инструкции для EXP 14

Бренды по названию

Популярные бренды