Still EXP 14 Скачать руководство пользователя

Страница: 68 / 144

Use

Authorised and safe use

Intended use of the trucks

CAUTION

This machine is intended for the transport of loads

packed on pallets or in industrial containers de-

signed for this purpose, as well as for placing pallets

into and removing pallets from stock.
The dimensions and capacity of the pallets or

containers must be adapted to the load being

transported to ensure stability.
The table of characteristics and performance

attached to this user manual gives you some of the

information you need to check that the equipment

is suitable for the work being carried out.
Any speciﬁc usage must be authorised by the

site manager; an analysis of the potential risks

associated with this usage will enable him to put in

place any necessary additional safety measures.

Safety instructions relating to use of

the truck

Behaviour when driving

The operator must obey the same rules within

the plant as on the road. The operator must

drive at a speed appropriate for the driving

conditions. For example, the operator should

drive slowly around corners, when entering

and travelling through narrow passageways,

when driving through swing doors, at blind

spots, or on uneven surfaces. The operator

must always maintain a safe braking distance

from vehicles and persons in front of him and

must always have the truck under control. The

operator must avoid sudden stops, making

fast U-turns and overtaking other vehicles in

potentially dangerous areas or areas with poor

visibility.

WARNING

Driving the truck while sitting down is prohibited.

Please remember the following:
• Drive the truck as described in the "Operator

positions" section.

• The truck must not be used as a stepladder.

45758043402 [EN]

Содержание EXP 14

















































































































































Результаты поиска

Содержание EXP 14

Отзывы:

Похожие инструкции для EXP 14

Бренды по названию

Популярные бренды

Still EXP 14, Оригинальное руководство пользователя

Результаты поиска

Содержание EXP 14

Отзывы:

Похожие инструкции для EXP 14

Бренды по названию

Популярные бренды