Still EXP 14 Скачать руководство пользователя

Страница: 51 / 144

Overview

Side protection

Description

The side protection has been designed to

protect the operator when the truck is used in

ride on mode.
There are two positions:
– Position "A" = side protection closed.

Position used when the operator is using

the truck in pedestrian mode (operated from

the "ground") with the platform closed.

The truck also works with the side protec-

tion closed (Position "A") and also with the

operator on board the truck. In this case the

maximum travel speed of the truck will be au-

tomatically limited for safety reasons.

– Position "B" = side protection open. Position

used with the operator on board the truck,

standing on the platform.

Opening and closing the side protection

– To open, pull the two operator side protec-

tive guards outwards.

– To close, push the two operator side

protective guards inwards.

Adjusting the height of the side protection

– To adjust the height of the side protective

guards according to the height of the

operator, open the side protective guards,

then manually pull the side protective

guards upwards (three positions). To close

the side protective guards, push them down

until they reach the original, lowest position.

45758043402 [EN]

Содержание EXP 14

















































































































































Результаты поиска

Содержание EXP 14

Отзывы:

Похожие инструкции для EXP 14

Бренды по названию

Популярные бренды

Still EXP 14, Оригинальное руководство пользователя

Результаты поиска

Содержание EXP 14

Отзывы:

Похожие инструкции для EXP 14

Бренды по названию

Популярные бренды