3
Knowledge of the Truck
Instrumentation and Controls
fork lifting only if the tiller is in vertical
position.
• The button (7) does not work if pressed
when the tiller is inclined.
WARNING
The truck is blocked when the button (7) is pressed
while the tiller is moved from vertical position to
inclined working position and vice versa
In this case, switch off the truck and start it again
using the switch key
NOTE
This function is ideal for manoeuvres in
confined spaces.
Tiller positions
OM1763
A
1
2
2
Position the tiller in accordance with the
forklift functions
In this case the tiller has two positions:
• Position (1) = working position.
In this position the driver can begin travel
using the throttle.
In this position the driver can begin lifting or
lowering using the appropriate button.
• Position (2) = braking position.
In this position the drive is locked and the
parking brake is engaged.
In this position, fork lifting is deactivated;
fork lowering remains activated, by means
of the relative pushbutton
• Position (2) using the “tiller always active”
function (optional) = slow speed position
This function is activated by pressing the
slow speed button on the tiller and rotating
the traction control throttle or by pressing
the slow speed button and the fork lifting
button.
NOTE
When the tiller is released, it automatically
returns to position (A), the braking position.
28
45588043482 EN - 04/2016
Содержание ECU-14
