Still ECU-14 Скачать руководство пользователя

Страница: 82 / 98

Servicing

Maintenance as required

OM1778

Instructions for ECU 16–18–20 version

• Turn off the truck and perform the prelimi-

nary maintenance operations.

• Raise the battery compartment hood (1).
• Disconnect the plug (2) from the outlet (3).
• Insert the sling hooks in the two battery

points (4). The entire sling must be suitably

sized for the weight of the battery.

• Lift the battery using a hoist suitably sized

for the weight of the battery.

• Change the battery and reﬁt it by following

the above steps in the reverse order.

CAUTION

To decide which type of battery to use, check the

battery characteristics provided in the "TECHNI-

CAL DATA" chapter.

DANGER

Use a crane with a suitable lifting capacity for

the weight of the battery. Lifting operations must

be performed by qualiﬁed personnel. DO NOT

stand within the crane’s radius of action or near

the truck. Do not stand in the danger area beneath

suspended loads. Use NON-METALLIC slings.

Make sure that the lifting capacity of the slings is

suitable for the weight of the battery. The rope

slings must be pulled vertically. To prevent short

circuits, it is recommended that batteries with polar

terminals or unprotected connections be covered

with a rubber mat.

45588043482 EN - 04/2016

Содержание ECU-14



































































































Результаты поиска

Содержание ECU-14

Отзывы:

Похожие инструкции для ECU-14

Бренды по названию

Популярные бренды

Still ECU-14, Оригинальное руководство пользователя

Результаты поиска

Содержание ECU-14

Отзывы:

Похожие инструкции для ECU-14

Бренды по названию

Популярные бренды