Still ECU-14 Скачать руководство пользователя

Страница: 52 / 98

Use and Operation

Checks and actions prior to commissioning

List of checks before use

WARNING

Damage or other faults to the truck or attachments

(special equipment) can result in accidents.
If damage or other faults are noticed on the truck

or attachments (special equipment) during the

following checks, do not use the truck until it has

been properly repaired. Do not remove or disable

the safety systems and switches. Do not change

the pre-set values.

CAUTION

Only use the truck if all of the covers are ﬁtted

correctly and the covers and doors are closed

correctly.

CAUTION

Perform checks on a ﬂat surface. Make sure that

there are no people or objects in the test area in

front of and/or behind the truck.

CAUTION

Drive very slowly during the operational tests.

Ensure that the vehicle is in good working

condition prior to start-up. These checks

supplement and do not replace the scheduled

maintenance operations.
• Check that there are NO oil leaks in the area

under the truck.

• Check that there are no objects (wires of

various types, nails, screws, pieces of tape

etc.) impeding the operation of the wheels

and rollers. The wheels and the load rollers

must roll freely.

• The wheels must not show any sign of

damage or heavy wear. They must be

correctly mounted.

• Check that the battery hood is fully and

properly closed.

• Test that all of the hoods and protective

guards are present and check that they are

correctly mounted.

• Check that NO stickers are missing or

damaged. Replace damaged or missing

stickers in compliance with the marking

position table.

• Visually check that the forks or other

load-carrying equipment show NO obvious

damage (e.g. bends, cracks, signiﬁcant

wear).

• Check that the battery male connector and

female connector are fully intact and in good

condition. Check that they are working

correctly.

• Check that the start/stop key works cor-

rectly.

• Check that the horn works correctly.
• Check that the buttons and the control

throttles on the tiller are working correctly.

• One at a time, push the buttons and then

release them. Check that the buttons return

automatically to their initial positions. The

buttons must not remain activated or stuck.

• Turn the drive control throttle and then re-

lease it. Check that the throttle automat-

ically returns to the initial position when it

is released. The throttle must not remain

activated or locked.

• Test that the truck brakes and stops when

the throttle is released during travel.

• Tilt the tiller, then release it. Check that the

tiller automatically returns to the vertical

position.

• Test that the truck brakes and stops when

the tiller is released during travel.

• Check that the truck brakes and stops when

the tiller is pushed all the way down during

travel.

• Check that the emergency shutdown

handle is operating correctly. Carry out

the test when travelling towards the forks.

• Check that the anti-crush/operator anti-

crush protective device is operating cor-

rectly.

• Check that the brake is operating correctly.

45588043482 EN - 04/2016

Содержание ECU-14



































































































Результаты поиска

Содержание ECU-14

Отзывы:

Похожие инструкции для ECU-14

Бренды по названию

Популярные бренды

Still ECU-14, Оригинальное руководство пользователя

Результаты поиска

Содержание ECU-14

Отзывы:

Похожие инструкции для ECU-14

Бренды по названию

Популярные бренды