Still ECU-14 Скачать руководство пользователя

Страница: 71 / 98

Use and Operation

Battery

1843

Instructions for recharging - (excluding

1400 kg version)

Follow the instructions below:
• Lift the battery cover (1)
• Take the plug (2) of the on-board battery

charger and connect it to the socket.

• The green LED (3) begins to ﬂash
• When charging is completed, the green

LED (3) remains lit.

• Replace the plug in its housing.
• Close the battery compartment cover.

WARNING

The red LED (4) indicates that the battery has been

left to charge for too long.
Do not leave the battery to charge for longer than

24 hours.

2251

Instructions for recharging (speciﬁc to

1400-kg version with GEL batteries)

Follow the instructions below:
• Lift the battery compartment cover (A)
• Take the plug (B) of the on-board battery

charger and connect it to the socket.

• The yellow LED (C) lights up and begins to

ﬂash.

• When charging is completed, the LED (C)

becomes green and ﬂashes slowly.

• Replace the plug in its housing.
• Close the battery compartment cover.

WARNING

If there is an alarm or a problem, the LED (C) turns

red.
Contact the technical service department authori-

sed by the manufacturer.

45588043482 EN - 04/2016

Содержание ECU-14



































































































Результаты поиска

Содержание ECU-14

Отзывы:

Похожие инструкции для ECU-14

Бренды по названию

Популярные бренды

Still ECU-14, Оригинальное руководство пользователя

Результаты поиска

Содержание ECU-14

Отзывы:

Похожие инструкции для ECU-14

Бренды по названию

Популярные бренды