10 Alarms and troubleshooting
ASTOTHERM PLUS Instructions for Use
35
10.5 Standby mode - failure
Control panel
Device response
The
“Standby” LED
is off and the device cannot be
switched to
On Mode
by pressing the “Standby” button
.
Possible
reason(s)
►
Required
action(s)
Power supply problem or no power.
►
Check plugs and fuses compare mains voltage with rating
plate.
Warmer not plugged in.
►
1. Plug the warmer into functioning socket.
2. Press the “Standby” button
.
3. Press then the “Start” button
to switch the device
to
Heating Mode
.
Warmer is defective.
►
Return ASTOTHERM PLUS to local sales office.
1
2
2
4
