5 Symbols
ASTOTHERM PLUS Instructions for Use
13
5 Symbols
Symbols, used on the Control Panel
Alarm condition if the
yellow “Alarm” LED lights
“Standby” button.
The Warmer is in
Standby Mode
if the blue LED is on
“Start” button.
The Warmer is in
Heating Mode
, if the green LED is on
“Increase” button increases the setpoint temperature
“Decrease” button decreases the setpoint temperature
Where these symbols are applicable, they appear at the relevant point on the
device, the package, the rating plate or in the accompanying paperwork.
Defibrillation-proof type B applied part
in accordance with
IEC/EN 60601-1
IPX 4
Splash proof in accordance to IEC/EN 60529
Refer to instructions for use! / Follow instructions for use!
Caution: Federal US law restricts this device to sale by or on
order of a physician.
General warning sign
Catalogue number
Serial number
Year of manufacture
Manufacturer
Electrical devices are valuable products and should not be
thrown in dustbin when the reach the end of their serviceable
life.
The device is conform to the MDD 93/42/EEC dated 14th June
1993 for medical devices. The Notified Body DEKRA
Certifications GmbH (Reg. No. 0124) monitors the quality
system of the manufacturer. The CE mark applies only to the
ASTOTHERM PLUS Warmer. Disposable parts (e.g. infusion
sets) suitable for use with this device have their own approvals.
