Warm Glow
™
Wipe Warmer Instructions
IMPORTANT:
Read all instructions carefully before using Warm Glow
™
Wipe Warmer. To reduce risk of burns, electrical
shock, fire and accident, use Warm Glow
™
Wipe Warmer only in accordance with the following instructions.
Use Instructions:
• Place Warm Glow Wipe
™
Warmer on a flat, stable and suitable surface.
• Slide locks (located on each side of the warmer) forward, and lift the main lid. Remove “Pop-Up” wipes or “Original/
Standard” wipes from their original package, and insert into warmer. If “Pop-Up” wipes are used, push top wipe up
through the opening under the smaller lid. Close both lids, and slide locks back into locked position. Be sure smaller lid
is also closed securely. Do not over-fill with wipes. Both lids should be able to completely close.
• To access a “Pop-Up” wipe, open smaller lid and pull. To access an “Original/ Standard” wipe, unlock and open main
lid. Be sure to slide locks back into place when finished.
(Please note, the use of “Pop-Up” wipes is preferred. To use
“Original/Standard” wipes, you must open the main lid each time a wipe is needed, which may contribute to the drying
of wipes.)
• To turn on the light, push the illuminated button (the power indicator) in the front of the warmer. Push the button again
to turn off. If the light is left on, it will automatically shut off after 10 minutes.
• Use only with a Class 2 Adapter.
• Plug transformer into a standard household 110-120 volt AC outlet. Do not plug into a 220 volt AC outlet. The power
indicator will be on when functioning properly and the unit will begin warming.
• Unit is intended to keep wipes warm for comfortable diaper changes. Wipes are not intended to reach a “HOT”
temperature.
• Use all baby wipes in accordance with specific manufacturer's directions.
• To preserve wipes and energy, unplug unit during prolonged periods of non-use.
Cleaning and Care:
• Always unplug unit from power source and ensure that it is cool before cleaning. Remove wipes and wipe unit clean
with a non-abrasive cloth.
• When adding new wipes to the Warm Glow
™
Wipe Warmer, pour up to ½ cup of water over the top of the wipes.
• If wipes need additional moisture, pour up to ½ cup of water over the top of the wipes. In rare cases, wipes may
become discolored due to prolonged exposure to heat. Remember to unplug your warmer if not planning to use for
prolonged periods of time.
• Do not immerse in water.
WARNING:
STRANGULATION HAZARD!
- Keep out of reach of children.
Do not use with extension cords. This is not a toy, adult use only.
Caution:
• This product is not a toy, for adult use only.
• Product should be used for intended purpose only - to warm wipes. Do not use unit to warm any other objects.
• For household use only. Do not use outdoors.
• Keep out of reach of children.
• Do not use in an oxygen-enriched environment or near equipment that stores or emits oxygen.
• Do not use the power cord as a handle. Never pull on the supply cord.
• Arrange power cord to minimize the possibility of accidents.
• Do not cover with blankets or any type of insulating material.
• Discontinue use if any signs of deterioration appear on the unit or on the supply cord.
• Do not immerse cord, plug or warmer in water or any other liquid.
• Do not tamper with warmer in any way. If for any reason the unit fails to function properly, immediately return it to
Munchkin, Inc. if within the warranty period.
• Unplug when not in constant use.
• Because of the continuous low levels of heat and moisture associated with the warmer, unit must be placed on a
compatible surface (wood and painted surfaces are not recommended). Munchkin, Inc. makes no warranty that surface
discoloration or damage may not occur due to heat or moisture.
• This product is not intended for use by children and persons with limited physical and mental capabilities unless they
have been instructed or supervised on the proper use of this product by a person responsible for their safety.
Limited Product Warranty:
Munchkin's Warm Glow
™
Wipe Warmer includes a one-year limited warranty against defects from the date of purchase. In the event of a malfunction
or defect during the in-warranty period, Munchkin, Inc., at its option, will replace or repair the product under warranty. Upon receipt of the product
and the proof of purchase with a valid date of purchase, the defective part will be immediately repaired or replaced and returned to you free of
charge (USA only).
Please send defective unit, proof of purchase with the original store receipt, and a description of the problem you have encountered to:
Munchkin, Inc.
7835 GLORIA AVE., VAN NUYS, CA 91406.
Attn: Warm Glow Wipe Warmer Warranty
Note:
Any product that has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental
exposure, alteration or accident, or has had its serial number altered or removed invalidates any and all claims against the manufacturer. Any damage
to property during or unintended use of this product is the sole responsibility of the end user.
The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult Munchkin, Inc. or a qualified technician for help.
MK0014 Rev 2
© 2020 MUNCHKIN, INC. 7835 GLORIA AVE., VAN NUYS, CA 91406. MUNCHKIN BABY CANADA LTD., 3-8460 MOUNT PLEASANT WAY,
MILTON, ON L9T 8W7. MADE IN CHINA / FABRIQUÉ EN CHINE.
CCD-0066-000 Rev 2A
