002BA552 AM
–
If possible, avoid using the upper quarter of
the abrasive cutting wheel for cutting. Use
extreme caution when guiding the abrasive
cutting wheel into a cut, do not twist or push
into the cut
002BA555 AM
–
Avoid any wedge effect - the severed part
must not brake the abrasive cutting wheel
–
Always be aware that the object to be cut may
move and other factors may cause the cut to
close and jam the abrasive cutting wheel.
–
The object to be cut must be secured and sup‐
ported so that the kerf remains open during
and after cutting
–
Objects to be cut must therefore be fully sup‐
ported and must be secured against rolling
away, slipping off or vibrations
002BA556 AM
–
Support an uncovered pipe stable and solid, if
necessary, use wedges – always bear in mind
a proper support and ground – material may
crumble away,
–
Always work with water and wet cutting when
using diamond abrasive wheels
–
Depending on the version, composite resin
abrasive cutting wheels are suitable only for
dry cutting or only for wet cutting. Always use
wet cutting with composite resin abrasive cut‐
ting wheels that are suitable only for wet cut‐
ting
2.11.1
Pull away from
002BA553 AM
The cut-off machine pulls forward, away from the
user, when the abrasive wheel touches the
object to be cut from above.
2.12
Working – cutting off
The abrasive cutting wheel must be
guided straight in the cut, without
wedging. Never exert lateral pressure
on the abrasive cutting wheel.
Do not use for lateral grinding or
scrubbing.
002BA554 AM
Do not stand in line with the abrasive wheel.
Ensure sufficient freedom of movement, espe‐
cially in construction trenches there must be suf‐
ficient space for the user and for the part being
cut to fall.
Do not lean too far forwards and never bend over
the abrasive wheel when the guard has been
pulled back.
Do not work above shoulder height.
The cut-off machine may only be used for cut‐
ting. It must not be used as a lever or shovel.
English
2 Safety Precautions and Working Techniques
8
0458-370-8321-C
Содержание TS 410
