23.1.1
TS 410
Displacement:
66.7cm
3
Cylinder bore:
50 mm
Piston stroke:
34 mm
Engine power to ISO 7293: 3.2 kW (4.4 hp) at
9000 1/min
Idle speed:
2500 rpm
Max. spindle speed in
accordance with ISO 19432:
5080 rpm
23.1.2
TS 420
Displacement:
66.7cm
3
Cylinder bore:
50 mm
Piston stroke:
34 mm
Engine power to ISO 7293: 3.2 kW (4.4 hp) at
9000 1/min
Idle speed:
2500 rpm
Max. spindle speed in
accordance with ISO 19432:
4880 rpm
23.2
Ignition system
Electronic magneto ignition
Spark plug (suppressed):
Bosch WSR 6 F,
STIHL ZK C 14
Electrode gap:
0.5 mm
23.3
Fuel system
All-position diaphragm carburetor with integral
fuel pump
Fuel tank capacity:
710 cm
3
(0.71 l)
23.4
Air filter
Main filter (paper filter) and flocked wire mesh
auxiliary filter
23.5
Weight
weight without fuel, without cutting wheel, with
water attachment
TS 410:
9.4 kg
TS 420:
9.6 kg
weight without fuel, without abrasive cutting
wheel, with electronic water control
TS 410:
9.9 kg
TS 420:
10.1 kg
23.6
Abrasive cutting wheels
The specified maximum permitted operating
speed of the abrasive cutting wheel must be
greater than or equal to the maximum spindle
speed of the cut-off machine used.
23.7
Abrasive wheels (TS 410)
Outside diameter:
300 mm
Max. thickness:
3.5 mm
Hole diameter/spindle diameter:
20 mm
Tightening torque:
30 Nm
Composite resin abrasive cutting wheels
Minimum outside diameter of thrust
washers:
103 mm
Maximum cutting depth:
100 mm
Diamond abrasive cutting wheels
Minimum outside diameter of thrust
washers:
103 mm
Maximum cutting depth:
100 mm
23.8
Abrasive wheels (TS 420)
Outside diameter:
350 mm
Max. thickness:
4.5 mm
Hole diameter/spindle diameter:
20 mm
Tightening torque:
30 Nm
Composite resin abrasive cutting wheels
Minimum outside diameter of thrust
washers:
1) 2)
103 mm
Maximum cutting depth:
3)
125 mm
1)
For Japan, 118 mm
2)
For Australia, 118 mm
3)
When using thrust washers with an outside
diameter of 118 mm, the maximum cutting depth
is reduced to 116 mm
Diamond abrasive cutting wheels
Minimum outside diameter of thrust
washers:
1)
103 mm
Maximum cutting depth:
3)
125 mm
1)
For Japan, 118 mm
3)
When using thrust washers with an outside
diameter of 118 mm, the maximum cutting depth
is reduced to 116 mm
23.9
Sound and Vibration Levels
For further details on compliance with Vibration
Directive 2002/44/EC, see
www.stihl.com/vib
23.9.1
Sound pressure level L
peq
in accord‐
ance with ISO 19432
TS 410:
98 dB(A)
TS 420:
98 dB(A)
23.9.2
Sound power level L
w
to ISO 19432
TS 410:
109 dB(A)
TS 420:
109 dB(A)
23.9.3
Vibration level a
hv,eq
to ISO 19432
Handle, left
Handle,
right
TS 410:
3.9 m/s
2
3.9 m/s
2
TS 420:
3.9 m/s
2
3.9 m/s
2
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
English
23 Specifications
34
0458-370-8321-C
Содержание TS 410
