Stihl MSE 250 C Скачать руководство пользователя

Страница: 2 / 36

Contents

Guide to Using this Manual.........................2

Safety Precautions......................................3

Reactive Forces.......................................... 7

Working Techniques................................... 8

Cutting Attachment................................... 15

Mounting the Bar and Chain (side chain ten‐

sioner)....................................................... 15

Tensioning the Saw Chain (side chain ten‐

sioner)....................................................... 16

Checking Chain Tension...........................17

Chain Lubricant.........................................17

10 Filling Chain Oil Tank................................17

11 Checking Chain Lubrication...................... 20

12 Coasting Brake......................................... 20

13 Chain Brake.............................................. 20

14 Connecting to Power Supply.....................21

15 Switching On.............................................21

16 Switching Off.............................................22

17 Overload Cutout........................................22

18 Operating Instructions...............................23

19 Taking Care of the Guide Bar................... 23

20 Motor Cooling............................................24

21 Storing the Machine.................................. 24

22 Checking and Replacing the Chain

Sprocket....................................................24

23 Maintaining and Sharpening the Saw Chain

.................................................................. 24

24 Maintenance and Care..............................28

25 Minimize Wear and Avoid Damage...........28

26 Main Parts.................................................29

27 Specifications............................................29

28 Ordering Spare Parts................................ 30

29 Maintenance and Repairs......................... 31

30 Disposal.................................................... 31

31 EC Declaration of Conformity................... 31

32 General Power Tool Safety Warnings.......32
Dear Customer,
Thank you for choosing a quality engineered

STIHL product.
It has been built using modern production techni‐

ques and comprehensive quality assurance.

Every effort has been made to ensure your satis‐

faction and trouble-free use of the product.
Please contact your dealer or our sales company

if you have any queries concerning this product.

Your

Dr. Nikolas Stihl

Guide to Using this Manual

This instruction manual covers a STIHL electric

chain saw which is also referred to as the saw,

power tool or machine in the descriptions.

1.1

Pictograms

The meanings of the pictograms attached to the

machine are explained in this manual.
Depending on the model concerned, the follow‐

ing pictograms may be attached to your

machine.

Chain oil tank; chain oil

Direction of chain rotation

Tension the chain

Thermal overload cutout

Unlock

Lock

1.2

Symbols in text

WARNING

Warning where there is a risk of an accident or

personal injury or serious damage to property.

NOTICE

Caution where there is a risk of damaging the

machine or its individual components.

1.3

Engineering improvements

STIHL's philosophy is to continually improve all

of its products. For this reason we may modify

the design, engineering and appearance of our

products periodically.

English

0458-764-0121-B

0458-764-0121-B. VA0.K21.

Printed on chlorine-free paper

Printing inks contain vegetable oils, paper can be recycled.

Original Instruction Manual

0000006541_014_GB

Содержание MSE 250 C





































Результаты поиска

Содержание MSE 250 C

Отзывы:

Похожие инструкции для MSE 250 C

Бренды по названию

Популярные бренды

Stihl MSE 250 C, Инструкция по эксплуатации

Результаты поиска

Содержание MSE 250 C

Отзывы:

Похожие инструкции для MSE 250 C

Бренды по названию

Популярные бренды