20
MS 171, MS 181, MS 211
:
Fit the clutch shoes (1) over the
arms (2).
:
Clamp the clutch in a vise
(arrow).
Attach the springs to the side with
the raised hexagon (arrow).
:
Attach one end of each spring (1)
to the clutch shoes.
:
Use the hook (2) 5910 890 2800
to attach the other ends of the
springs and press them firmly into
the clutch shoes – do not
overstretch the springs.
533RA015 TG
1
2
533RA016 TG
1
2
533RA017 TG
:
Check the clutch – all springs
(arrows) must be properly
attached.
– Cover washer (1) must be in
position.
It is correctly fitted when “TOP”
(arrow) faces outwards.
:
Position the clutch on the
crankshaft stub so that the raised
hexagon (arrow) faces outwards.
533RA018 TG
TOP
533RA019 TG
1
TOP
533RA020 TG
:
Use the hexagon (arrow) to
screw the clutch (1) onto the
crankshaft stub. Check the
position of the locking strip and
then tighten down the clutch
firmly – left-hand thread.
– Tightening torques,
b
3.5
– Remove the locking strip from the
cylinder.
– Reassemble all other parts in the
reverse sequence.
TOP
533RA021 TG
1
All manuals and user guides at all-guides.com
all-guides.com
