66
MS 171, MS 181, MS 211
:
Check operation
– short circuit wire connector
must touch the contact spring
(arrow) in position “
0
“.
– Install the carburetor,
b
14.3
– Install the throttle rod,
b
14.6
– Install the handle molding,
b
12.2
– Reassemble all other parts in the
reverse sequence.
– Tightening torques,
b
3.5
12.2
Throttle Trigger /
Interlock Lever
– Remove the filter base,
b
14.2
:
Use a screwdriver to ease the
lugs (arrows) apart and push
them through the handle frame
from below.
533RA174 TG
533RA260 TG
:
Remove the handle molding (1).
:
Disconnect the throttle rod (1)
from the throttle trigger (arrow).
:
Pry the interlock lever (1) out of
its mounts and lift it away.
533RA261 TG
1
533RA247 TG
1
533RA263 TG
1
:
Remove the throttle trigger (1)
with torsion spring (2).
– Inspect the interlock lever,
throttle trigger and torsion spring
and replace if necessary.
:
Attach the torsion spring (1) to
the throttle trigger (2)
– note installed position (arrow).
:
Place throttle trigger (1) in
mounts (arrow) in rear handle.
5
33RA264 TG
1
2
1
1
533RA267 TG
2
5
33RA268 TG
1
1
All manuals and user guides at all-guides.com
