68
Series 4144 Components FC, FS, KM
The drive shaft is supported in the
flexible liner inside the drive tube.
If the drive shaft has turned blue,
install a new one.
– Before installing the drive shaft,
coat it with STIHL gear lubricant
for hedge trimmers,
– Apply the grease evenly to the
drive shaft. Do not pump grease
directly into the drive tube or
flexible liner.
:
Push the drive shaft (1) into the
flexible liner (arrow) until it
engages the driver.
– Check operation.
– Rotate the drive shaft – the driver
at the other end must rotate too.
545RA244 TG
1
– Line up the coupling sleeve (1) so
that the gap in the clamp points
down.
– Push the coupling sleeve (1) onto
the driver end of the drive tube as
far as stop.
:
Tighten down the screw (arrow)
firmly.
– Reassemble in the reverse
sequence.
– Tightening torques,
9.1.2
Disassembling (FC 56)
– Remove the drive tube,
– Remove the loop handle if
– Remove the carrying ring if
:
Loosen the screw (arrow).
– Pull off the gearbox (1), check it
and repair or replace as
necessary
– see "KombiTools" service
1
545RA246 TG
545RA291 TG
1
manual.
:
Pull the drive shaft (1) out of the
drive tube.
If the drive shaft has turned blue,
install a new one.
:
Pull out the flexible liner (1) out of
the drive tube, check it and
replace if necessary.
:
Push the flexible liner (1) into the
end of the drive tube with the
cross holes (arrows).
1
545RA293 TG
545RA248 TG
1
545RA249 TG
1
Содержание FS 40
