Stihl FS 40, Руководство по обслуживанию

Страница: 54 / 82

53 Series 4144 Components FC, FS, KM
:
Inspect the tip (arrow) for
damage or wear and replace the
screw
(L) if necessary.
– Screw down the low speed
screw (L) as far as stop.
– Continue with high speed screw.
High speed screw
:
Use special tool 5910 890 4501
to pry the limiter cap (1) off the
high speed screw.
Do not re-install used cap – always
fit a new cap.
296RA263 TG
545RA015 TG
1
:
Take out the high speed
screw (1).
:
Inspect the tip (arrow) for
damage or wear and replace the
high speed screw if necessary.
– Screw down the high speed
screw (H) as far as stop.
545RA016 TG
1
296RA267 TG
Pre-installing limiter caps
Low speed screw (L)
Always use a new limiter cap and
position it so that the long part of the
cap butts against the underside of
the stop (arrow).
:
Push the limiter cap (1) on to the
low speed screw as far as the first
detent – the limiter cap is thus
prepared for final installation.
296RA264 TG
1