Stiegelmeyer Evario Скачать руководство пользователя страница 45

Страница: 45 / 168

Instruction manual for Evario hospital bed

6.6.16 Li-Ion Battery (Optional)

A modern high-capacity lithium ion battery can be used for temporary emergency operation of the

electrical actuator system. This guarantees that all motorised adjustments can be carried out even

during a power cut.

Emergency Operation

When the bed is occupied by a patient of normal weight (approx. 80 kg), up to 30 full UP/DOWN

adjustments can be made if the battery is new and fully charged.

Under emergency conditions, if the battery capacity is depleted, an alarm will sound and all ad-

justments will be stopped.

Recharging/Battery Charge Indicator

The batteries are fully charged when the bed has been connected to the mains supply for at least

8-10 hours.

It is impossible to overcharge the battery.

During the charging process, the bed can be adjusted using the LCD handset, the control box or

the locking box.

Lithium ion batteries have a considerably longer lifetime than conventional lead-acid batteries. In

normal use, this service life is up to eight years.

Batteries need to be replaced when operation cycles become very short. For safety reasons, at

least one more height adjustment (up + down) should always be possible. Otherwise, the batteries

must be replaced. In this case, contact Stiegelmeyer’s Service Centre. We will replace recharge

ble batteries and dispose of the old batteries correctly.

A multi-stage charge indicator on the LCD handset/control box display keeps you informed about

the current charge status.

Bed not connected to power supply / li-Ion battery operation:

Display

Explanation

Battery fully charged

Battery approx. 2/3 charged

Battery approx. 1/3 charged - connect bed to power supply as soon as possible

Battery empty - connect bed to power supply as soon as possible

Bed connected to power supply:

Control Box/Locking Box Indica-
tion

Indication on the Dis-
play

Explanation

No display

Battery fully charged

Yellow LED on

Battery charging

Содержание Evario









































































































































































Результаты поиска

Содержание Evario

Отзывы:

Бренды по названию

Популярные бренды

Stiegelmeyer Evario, Инструкция по эксплуатации

Результаты поиска

Содержание Evario

Отзывы:

Бренды по названию

Популярные бренды